94 Responses

  1. Carsten
    Carsten at |

    Great article! When you say homologated, are the results with the restrictor washer removed or kept in place?

    Reply
  2. Bigurge
    Bigurge at |

    Hello Daniel, a really interesting aritcle. So good i read every single word of it BUT you seem to have mixed up something:
    The graph, the RPM with the most power and even the torque is identical between the Hebo New Performer and your price-performance winner the Stage 6 Pro Replica.
    I was wondering if the mufflers are that similiar but after reading the text below the Stage 6 Pro Replica i am pretty sure you accidentally copied everything from the Hebo New Performer and pasted it in the performance graph and even the text of the Stage 6 Pro Replica.
    Below the Stage 6 Pro Replica graph and text it clearly says “streetbuzz nitro hebo racing” just like in the description of the Hebo muffler.
    Sorry for my bad english but i had just some years of english lessons at school.
    After a new overview, what is the S6 Pro Rep really about ???

    Reply
    1. Daniel
      Daniel at |

      Yes, unfortunately Streetbuzz fucked it up and posted the wrong datasheet. They later had a screen of the correct one but it was only possible to read the horsepower and not the torque. The Pro Replica is indeed really good! I would recommend it any day also because of the high quality and fitting Stage6 provides!

      Reply
      1. Bigurge
        Bigurge at |

        Ok, so still your price-performance winner….?
        Can you please tell me how much horsepower the Pro Rep generates and at wich RPM it generates its maximum horsepower ?

        Reply
        1. Bigurge
          Bigurge at |

          Oh, nevermind !
          I think i found the answer in the charts, 10.5 hp at 8608rpm – right?

          Reply
          1. Daniel
            Daniel at |

            Yes, exactly! Stage6 also has a really good quality so you will be really happy with it. You should have a look at ebay. You can buy it really cheap there sometimes!

  3. rpm
    rpm at |

    Hello Daniel,

    Would the Yasuni city 16 perform a bit better than the Yasuni R and a bit less than the Yauni c16?

    Reply
  4. Ross Borgida
    Ross Borgida at |

    Hi Daniel

    I have a modified Kymco Like 50 with a Malossi 70cc cylinder and variator kit. I am looking at the following three pipes: Leovince ZX-R, Tecnigas RS II, or Tecnigas Next R. Which pipe do you recommend with the Like 70cc for improved lower end and higher end performance?

    Thanks
    Ross

    Reply
  5. Ross Borgida
    Ross Borgida at |

    Hi Daniel, do you have any thoughts on the Naraku Traffic exhaust? Which exhaust would you recommend most with the Kymco Like 50 2T with Malossi 70cc kit? Thanks! Ross

    Reply
  6. kwstas
    kwstas at |

    greetings daniel what shall i buy tecnigas next r or stage6 pro replica ?(maybe i will buy stage6 streetrace mk2)

    Reply
  7. Petros
    Petros at |

    greetings Daniel, What would you buy for a yamaha aerox 100cc with a 120cc cylinder and a Malossi variator kit?
    Tecnigas Next R, Tecnigas RS2, Endy Chrome Powerpipe or something else???

    Reply
  8. Petros
    Petros at |

    Hi Daniel, and if i can’t find the MHR or it’s not available for the 100cc
    which one of the above would you choose?

    Reply
  9. petros
    petros at |

    Hi Daniel, I don’t know the brand but it was from Taiwan…

    Reply
  10. petros
    petros at |

    also what do you think about the CDI is it really restricted? and if it is will this do???

    http://www.ebay.co.uk/itm/251010486361?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

    Reply
  11. petros
    petros at |

    Greetings Daniel,
    I bought the tecnigas next R and I’m disappointed, because the results was quite the opposite from what I expected it didn’t gave any power instead lost power from take-off and top end and the engine sounds slow. any ideas what should I do?
    my current set is:

    1)Taiwan 120cc cylinder kit
    2)Malossi double sponge on original air box
    3)Malossi reed block with that thing (I don’t know what is called… lol) that makes the hole from square to circle installed
    4)Standard carburetor with main jet 80 (standard jet 74)
    5)Malossi multivar variator kit with 9.3gr rollers and white contra spring
    6)Malossi belt
    7)Naraku clutch

    Thanks Petros

    Reply
  12. Laurynas
    Laurynas at |

    hi ,whats a best exhoust to use with stage 6 sport pro,stage 6 clutch,stage 6 sport pro variator and motorforce crank shaft?

    Reply
  13. Neil
    Neil at |

    Great article, very interesting. I’m stuck; I have a stock Piaggio Typhoon 80 and am looking for a decent exhaust that fits. Stacks of options for the 50 and 125 but nothing listed for the 80. I’ve read that a decent 70cc compatible exhaust would be ok but not sure if the connection to the cylinder port is the same. Any info appreciated! Current thinking is the Yasuni Z may be way to go. Cheers!

    Reply
  14. larry
    larry at |

    Hi whats the best exhoust to use with stage 6 sport pro70cc,19mm delorto carb,polini variator,polini or malosi delta (not sure witch one to buy) and sport crank

    Reply
  15. Neil
    Neil at |

    Hi Daniel,

    Many thanks for your recommendations, I’ve had the bike 15 years and restored it like new and the exhaust will be the icing on the cake so to speak. I reckon there’s a lot of untapped potential in the engine (new cylinder etc this year) and the Yasnsui C16 does sound the part — there’s a city version too which means I can keep the centre stand so will go for that. Will report back with the results in due course!

    Cheers and great article once again. Neil

    Reply
  16. laurynas
    laurynas at |

    hi daniel some plans changed i got stage 6 sport pro 70cc kit,malossi delta clutch,malossi multivar ,malossi cdi,dellorto 19,and motorforce sport crank shaft whats the best exhoust to use ?

    Reply
  17. ZipSP
    ZipSP at |

    Hi Daniel. I have a zip sp with a sport pro replica, malossi multivar and malossi fly clutch and bell. Would you recommend the streetrace 70cc or the sport pro mk2 70cc ??

    Reply
  18. ZipSP
    ZipSP at |

    Thanks

    Reply
  19. Selchuk
    Selchuk at |

    Hi, can i drive with top performance nardo with Sport Pro mk2 cylinder?

    Reply
  20. Raceboy
    Raceboy at |

    Hey Daniel. Would the stage 6 pro replica work better with a streetrace 70cc or sport pro mkII?

    Reply
  21. azser@hotmail.co.uk
    azser@hotmail.co.uk at |

    Hi Daniel, I have a speedfight 3 AC all standard parts. I want to derestrict it but don’t know which would be the best exhaust to do this! can you help??

    Reply
  22. Casey
    Casey at |

    I have a 08′ Zuma 50 with a Top Performance Black 70cc BBK. I have the stock 10mm crank and I’m looking for a pipe that doesn’t rev super high as I don’t want to destroy my stock crank. Also… I had a Leo Vince ZX-R and it was damaged. I’m looking to replace it with something else. I want max performance but don’t want to blow the 10mm crank.

    Thanks!!!
    Casey

    Reply
  23. Casey
    Casey at |

    I like the Stage 6 Pro Rep, but people say it revs to high for my crank. What do you think? What would be your first choice for my setup?

    Reply
  24. Larry
    Larry at |

    Still a great site – great posts – haven’t heard from you in awhile but nice to see you going strong.
    Larry

    Reply
  25. René
    René at |

    Hallo
    Ich fahre ein mbk nitro wassergekühlt. Mein set up: 70ccm stage6 streetrace, 21 dellorto Vergaser, malossi multivar vario und malossi Delta clutch Kupplung. Stage6 einlasssystem USW. Jetzt zur meiner Frage, würde der stage6 r1200 gut laufen oder eher ein anderer? Momentan fahre ich denn yasuni R.
    Danke schon mal
    MfG

    Reply
  26. Antti Raatikainen
    Antti Raatikainen at |

    I’m hoping you can give me some info on the Giannelli Rekord exhaust, powerband characteristics and rpm range, also how well do you think it would work on the same Stage6 streetrace 70cc setup compared to those others in the test?Thanks

    Reply
  27. dave
    dave at |

    hello Daniel
    I have a 05 zuma with malossi sport 70 kit. have a 17.5 dellorto carb stock air box and a brand new pro replica pipe. I cant get this thing to rev up with any power so I changed the pipe to my leo zx and it just rips. I then took the pro replica and put it on my stock 50 and it does the same thing no power. any idea what might be the problem with the pipe? I did remove the header funnel in it
    any help would be great
    dave

    Reply
  28. dave
    dave at |

    hello Daniel
    first you rock with helping people out!!
    ok I have my 70 set up tuned perfect to my leo zx. it is rusted and welded a few times thus replacing with the pro rep. on the stand it will rev up but just doesn’t sound crisp. I can jet and needle adjust real crazy and doesn’t seem to change much. with the leo on I have 5 gram sliders in koso clutch and it screams up to 45 and gets there quickly. I put 4 gram rollers and still nothing with the pro rep pipe. is there something inside that might have been bad from new?
    dave

    Reply
  29. Joe
    Joe at |

    I have a stage6 race mk1 70cc kit with an athena upgraded crank, 21mm dellorto 90/45/w7, stage6 torque control with red clutch spring at max tension. the scooter launches at 8000 and it rips hard.

    anything below 8000 it’s a snail. my leo vince zx-r has tons of power from idle to 8000, but nothing after 8000.

    i can’t commute with the city16 since it can’t go slow :( any help?

    Reply
  30. jordan
    jordan at |

    HI Daniel – I have a 2011 zip sp de-restricted and have just changed my exhaust to a Leo Vince ZX . .can you suggest a set up to use as all the power is at the top end , just takes an age for the rev’s to get there . .really want it to set off a lot quicker . .and any thing else you think i should consider . .

    Thanks

    Jordan .

    :-)

    Reply
  31. Luke Roigard
    Luke Roigard at |

    Got anything for the 2 stroke 125cc range?

    Reply
  32. Chris Altizio
    Chris Altizio at |

    Hey Daniel: Is the Stage6 Pro Replica designed to be used on either a 50cc/70cc set-up or just a 70cc kit?

    Reply
  33. Robert
    Robert at |

    Hi!
    Is there is also a muffler restrictor in a Turbo Kit pipe set? Or is it just a noise-killer..
    The restrictor at the manifold is removed and I noticed a small pipe going in to the perforated chamber in the muffler when i re-stuffed it.
    Thanks
    Robert

    Reply
  34. brandon
    brandon at |

    Daniel, not sure if this is still active, but BIG kudos for doing this work. This kind of information is really valuable, and I know It took alot of time. I have a dynomometer myself and I am aware of the labor! Anyways I picked up a 00 aprilia sr50 with top perf pipe, bore, and dell 19mm/stage6 vari kit. I can’t get it to run with any less than 3/4 throttle input. Once I get the revs up its fine, but when going from idle up, it cuts out completely. Im running 90mj, 45pilot, 60 choke. I have heard the needle position is huge on these, does that sound like my issue? Its an absolute rocket once I can nurse it past the dead zone.

    Reply
  35. Adrian T.
    Adrian T. at |

    Hello Daniel,
    I have a Cpi Gtr 50cc LC minarelli horizontal engine that is stock and i’m thinking to change it with a 70cc cylinder and i’m not quite sure what to buy.What is your suggestion?I use the scoot every day.
    I was looking at the stage6 engine kit from here: http://www.maxiscoot.com/pack-moteur-stage6-70cc-sport-mbk-nitro-aerox-ms-pkms670sport.html
    or here: http://www.scooter-center.com/de/product/AIR1004/Zylinder+AIRSAL+70+ccm+T6+Racing+CPI+LC+GTR+2+Takt?meta=?cat=A_CPI_GTR50&catmatch=CAT_ZYLINDER_ZYLINDER with the tecnigas next r :http://www.scooter-center.com/de/product/TG06093841R/Auspuff+TECNIGAS+Next+R+CPI+GTR?meta=?cat=A_CPI_GTR50&catmatch=CAT_AUSPUFF_AUSPUFF, excelent price on the airsal cylinder and tecnigas next r.
    PLEASE help me take a decision.

    Reply
  36. Adrian T.
    Adrian T. at |

    Also any other advice will be much appreciated.Thinking to change in the near future the variator and clutch kit,CDI and the ignition coil.Thank you very much.

    Reply
  37. Boyd
    Boyd at |

    Hi I’m very stuck atm I have a aerox with stage 6 mkii racing 24mm r/t carb hpc 12mm crank good vari good clutch good reeds but I’m stuck on what pipe to get its used once every couple of weeks so not daily and want the best bang for buck was thinking either r1200 or r1400 please help

    Reply
  38. Anthony
    Anthony at |

    Hi Daniel,
    I have a piaggio typhoon 2 stroke 2015 model, what do you suggest I should do to derestict it with out opening the engine up.
    Thanks

    Reply
  39. Jesse
    Jesse at |

    Hey i have stage 6 streetrace 70ccm and i want the Best exhaust for my setup i got 21mm carb malossi multivar stage 6 sport pro clutch and other stuff! And atm i have gianelli reverse

    Reply
  40. xxx.com
    xxx.com at |

    Great web site you have here.. It’s hard to find quality writing like yours nowadays.
    I truly appreciate people like you! Take care!!

    Reply
  41. Jon mattijs Boon
    Jon mattijs Boon at |

    what was the setup on this test aerox i mean the carb size and jet the clutch the vario and transmission and i have the yassuni R myself and what setup on vario and clutch do u think would work i have an 19mm carb jet 74 now i have 4g rollers yellow malossi clutch spring and the others idk actually

    Reply
  42. abbey
    abbey at |

    hi i have gilera dna 70 cc malossi sport exhaust malossi flip omologate polini high speed variator malossi cluch fly 4.7 gm rollers watch torque spring i have to use ?

    Reply
  43. Dave
    Dave at |

    Hey Daniel….about to add working silencer and muffler to Yama Aerox YQ50 (2003) will the Stage6 Pro Replica do the job …..original muffler kit makes so much noise!!
    Any advice and compatibility and other would be appreciated….
    cheers,
    david

    Reply
  44. Karolin1979
    Karolin1979 at |

    Hello blogger, do you monetize your website ?

    There is easy way to earn extra money every month, just search on youtube – How to earn with
    wordai 4

    Reply
  45. Bryan
    Bryan at |

    Daniel, I have a Malossi 70cc sport cylinder (cast iron) kit, 17.5 del. carb. Unrestricted manifold. Uni red air filter. Malossi fly clutch. Yellow springs. 4g sliders. Recently upgraded from Yasuni Z to c16 and it’s dog slow. Please help.
    Thanks in advance.
    -bryan

    Reply

Leave a Reply